How to Connect a DVD Player to a Vizio TV – User Guide

Although many users use a computer to watch videos, DVD players are still in use. Modern models differ from previously released compact size, functionality and a large set of connectors. Manufacturers of digital equipment have thought of several ways how to connect a dvd player to a vizio tv, allowing each user to choose the best option.

How Do I Hook Up My DVD to My TV

Before starting the connection procedure, you need to carefully inspect the DVD player and TV for available ports.

The number and configuration of connectors depend on the novelty of the model and its functionality.

Older models of TV receivers and DVD players differ significantly from the latest versions. Let’s look at the most commonly used connectors.

What Is HDMI on a DVD Player

This option is considered optimal for synchronization DVD player with the plasma. HDMI cable provides the highest level of audio and video signal transmission. To get a colorful picture and clear sound, you need to use a quality connection cable. Experts recommend choosing a cable marked High speed with Ethernet.

SCART

Modern models of DVD players are increasingly rarely equipped with this connector. This option provides optimum picture and sound quality, second only to HDMI. You will need a SCART-RCA cable to interface your equipment.

RCA

The next type of connector is actively used from year to year and, despite the appearance of improved versions, remains relevant. RCA ports are used to connect equipment via “tunnels”. It is a set of connectors of three colors: red and white – for audio signal transmission; yellow – for video.

S-Video

The S-Video port is only recommended if no other connection is possible. Only pictures can be sent through this port, you will need a special adapter cable for sound. If the DVD player has no connector and the TV has a conventional antenna input, an S-Video-RF adapter is used.

Modern manufacturers offer buyers a few available options for synchronizing equipment – the user only has to choose the most suitable.

Connecting

To connect the DVD player to the TV, you need to choose one of the available ways, prepare the necessary cable and, following the clear diagram, do the work. Following the simple steps, properly connect the DVD player to the TV will not be difficult.

The DVD player and the TV receiver must be disconnected from the mains during pairing.

After completing the work, the equipment should be turned on and checked for proper operation.

How Do I Connect My DVD Player to My Samsung Smart TV with HDMI

Connecting via HDMI port and cable is only possible with modern technology. This is a simple and easy way of synchronization, which provides a high-quality signal.

Pairing is quite simple.

• First, you need to find the right connector on the TV – usually it is located on the back panel. The port may be labeled HDMI in next to it.
• Locate the connector on the DVD player. Manufacturers refer to this as HDMI Out.
• Connect the equipment with the cable. Make sure that the plug fits snugly into the connector. If the cable was not included, you will need to purchase one.
• Turn on the TV and open the settings window. Set it to receive video and audio through the HDMI input.
• Turn on the DVD player and check the connection.
• Insert a disc or flash drive into the DVD player, turn on the video and check the equipment.

Helpful Video: How To Connect A Dvd Player To A Vizio Tv

This video will help you to connect a DVD player to your tv.

How Do I Hook Up a DVD Player to a Vizio TV without HDMI

A distinctive feature of the SCART cable is its large size. As in the above case, you will need only one cord for synchronization. The connection process is very simple. It is enough to take the cord and connect it to the corresponding ports on the DVD player and the TV receiver.

Depending on your TV there may be more than one SCART port. In this case, choose the one with the label “In” next to it.

This next option is most often used with older DVD player equipment. Many users have long been familiar with ports and cables of this type. To connect the equipment, it is enough to connect a cord with three colored plugs on both ends into connectors of the appropriate color: red, white and yellow. Despite the easy and clear operation, this method has a significant disadvantage – reduced picture quality compared to the above methods of connection.

To connect the DVD player to the TV via the S-Video output, you need to buy a special cable. The name of the port indicates that this channel is only suitable for picture transmission. To transmit the audio signal, you will need to use another cable.

No additional settings are required for the connection. All you need to do is plug the cable into the equipment, turn it on and enjoy the movie.

Using the methods described above, you can connect both stationary and portable players. Also, at this link, you can find out how to get internet on vizio smart tv

Using a Component Cable

On some DVD players you can find the standard color “tulip” ports, but only in the number of 5 pieces instead of 3. This is an improved version that provides a higher quality signal transmission. Despite the increased number of ports, the connection process is the same as with the standard RCA cable. The connection is exactly the same color. After testing for successful signal transfer.

Additional Recommendations

In the process of connecting the equipment, it is important to observe its correct location. Specialists do not recommend putting the DVD player on the TV. During operation, the temperature of the equipment rises, and in this position, the equipment will heat each other. This violation in the process of operation can lead to a breakdown.

Many users make the mistake of placing the TV over the turntable. It is not recommended to do this, even if the TV receiver has small size. Not all players can boast the strength of the case. It is best to use a special TV cabinet with a special shelf for the DVD player.

Preferably, the player should be placed close to the TV. With a long-distance, the connecting wires get very hot, which negatively affects the quality of signal reception and transmission.

High temperature especially affects the HDMI cable. If the wires are under a lot of strain, they may not stay in the sockets properly.

How Do I Get Rid of Unwanted DVDs

For small-scale destruction, tin snips work well. They have enough force to break through the disk. However, they are blunt enough to cause small cracks along the plumb line. Another option would be kitchen shears with a serrated side. They will do the job if you want to damage the data layer along with the cut along with the plastic. This is best done in a bag because this method creates sparkly bits.

Crushing CDs, DVDs. You need to put the hard drive on a flat, hard surface and hit it with a hammer. Do not forget about safety precautions: wear protective goggles and gloves. During the disk crushing, there should be no one in the room but you. Shards of glass, metal and plastic will be flying around, so it is best to wrap the disc in food film.

It is important to remember that the only method that guarantees a 100% result is the mechanical destruction of discs with a shredder. Only in this case, you can be sure that the confidential information stored on the digital media will become completely inaccessible.

Possible Problems and Troubleshooting

The process of synchronizing the equipment is simple, but in this case, you may encounter various problems.

• If the equipment refuses to work, you need to check the power supply. Perhaps the fault lies in the socket or wiring. Plug in any other device, and check that it works. If the problem is in the wiring, it is better to seek help from professionals. Also, carefully inspect the wire for damage.
• If there is no sound or picture, you need to check the integrity of the cable used for synchronization. If you find severe defects, it should be replaced. Do not skimp on the quality of the wire – picture and sound transmission depends on it. Do not forget to configure the TV after connecting the player. In the appropriate menu you need to select a new source of signal reception.
• If the TV receives a signal from the DVD player, but its quality is very poor, you may need to check the reliability of the connection. The plug must be tightly held in the socket. If the jack begins to play loose, the equipment should be returned for repair.
• Lack of signal or poor signal quality may be due to a foreign object in the connector. Check the ports before pairing and periodically clean them of dust and other debris.
• If this is the first time you have connected a turntable or TV, you may be dealing with defective equipment. If possible, use other equipment to locate the source of the problem. Before the warranty period is up, the equipment may be returned to a service center for free repair or replacement.
• Store the cable in a dry place out of the reach of children and animals. Fold it carefully. Ties or other securing devices may be used to secure it. Make sure there are no kinks in the cord.

You can connect the DVD player to the TV yourself. The procedure is quite simple and even an inexperienced person can handle it. The devices are unplugged, connected with a special adapter cable, it remains only to select the signal source on the TV and run the disc on the player. If all the equipment is serviceable, the connection process will take five minutes of your personal time.